What Should a Carpet Cleaning Service Do For Cleaning a Sewage Back Up Spill?

what should a carpet cleaning service do for cleaning a sewer back up spill

The first step in removing sewage water from a carpet is to take it out, replace the padding, and shampoo the carpet. If this is not an option, you should contact a carpet cleaning service for help. While the carpet is still wet, take a hot shower with antibacterial soap. Rinse the entire affected area thoroughly. You can use a nailbrush to deep clean the affected area.

Removing damaged carpet and pad

The first step in cleaning a sewer back up spill is to remove the damaged carpet and pad. If the spill is minor, it will most likely be easy to remove and discard. If the spill is a major one, however, you may be able to salvage the carpet and pad and clean it. If this is not possible, it will need to be removed and disposed of. The pad and carpet should be cleaned with antimicrobial solutions and disposed of.

To start cleaning a sewer back up spill, you should put on gloves and wear protective gear. The sewer water contains many bacteria that can cause a range of health problems. The bacteria can enter your body through wounds, cuts, and skin pores. In addition to gloves, you should wear protective footwear and a mask to protect yourself from exposure to contaminated surfaces. If the spill was severe, you may want to consider hiring a professional to remove the damaged carpet and pad.

Removing sewage water from air conditioning system

Getting rid of sewage water in your air conditioning system is important for several reasons. One of them is the negative environmental impact that this water has on the environment. If you don’t remove sewage from your system, the sewage water and pollutants can cause the collapse of entire ecosystems. Bacteria are a leading cause of this, and they flourish in moist, warm environments without proper ventilation.

Ventilating affected area

To begin the cleanup process, open windows and use a dehumidifier to draw out the standing water. Remove any solid waste or contaminated materials and scrub the affected area. Use a disinfectant such as chlorine bleach. It helps create an initial disinfectant barrier and slows down the spread of sewage-borne bacteria. Then, allow the area to air-dry. When cleaning up a sewage back-up spill, it is important to ventilate the affected area.

Removing contaminated pad

The first step in cleaning up a sewage backup spill is to decontaminate yourself. Use an antimicrobial soap to scrub your hands, and wash your clothes in a solution of antibacterial detergent. Then, throw away the contaminated pad. After scrubbing your carpet, make sure to remove any contaminated clothing. This will make cleaning easier. If the sewage back-up is severe, you may need to call a professional to clean the area properly.

Schedule Your FREE Consultation Today!

(847) 526-6060


Accreditations or Certifications