How to Service a Powr Flite Carpet Cleaning Machine Vacuum System
If you own a carpet cleaning machine, you need to know how to service it properly. This article will explain maintenance and troubleshooting tips, including how to service the recovery hose. Follow the instructions below to learn how to service your Powr Flite carpet cleaning machine vacuum system. This article also discusses how to repair a Powr Flite Perfect Heat. After reading the instructions, you should have no problem repairing or servicing your machine.
Maintenance of carpet cleaning machine vacuum system
A carpet cleaning machine that is able to perform a variety of tasks can be a worthwhile investment. A vacuum can perform a variety of tasks, and it is especially helpful if it is equipped with the right accessories. The Powr-Flite brand offers many different types of commercial floor care equipment, from scrubbers and burnishers to blowers and vacuums. ProTeam excels in commercial vacuums, including upright and canister models as well as hip and backpack-style uprights.
Troubleshooting tips for carpet cleaning machine vacuum system
If you are having trouble with your power flite carpet cleaning machine vacuum system, you may need to replace the electronic float switch with a ball float. If this does not fix the issue, you need to replace the plastic boot that surrounds the vacuum port on the right wall of the machine. Foam in the recovery tank is a sign that the plastic boot surrounding the vacuum port is turned the wrong way. It should be turned to the right wall of the machine and toward the ball float. If the problem persists, you may need to clean the vacuum motor chamber.
Check the hose of the carpet extractor to ensure that it is not clogged with debris. A clogged recovery tank will block the suction from the machine. To make sure the hose is still functioning properly, empty the recovery tank and test water pickup. Next, make sure the connection between the machine and the vacuum shoe is tight. If this is not enough, try contacting an authorized repair center.
Cleaning the recovery hose of a carpet cleaning machine
In order to avoid recurring problems with your carpet cleaner, it is crucial to regularly clean the recovery hose. Damage and dirt can build up within the hose, resulting in a reduced amount of suction and poor extraction results. Additionally, improperly cleaned hoses may leak too much liquid, resulting in recurring stains and negative effects on the appearance of your facility. Luckily, there are many easy ways to clean your recovery hose.
First, locate the grey rubber hose connector on the back of your carpet cleaning machine. Then, turn on the vacuum switch. Place a piece of newspaper underneath the front of the machine to test the recovery hose’s ability to pull suction. If you don’t get any suction through the hose, turn off the machine and return it to the store where you hired it.
Another easy way to measure airflow is by checking the CFM of your recovery tank. It is difficult to measure airflow directly, but the easiest way to do it is to refer to the performance curve of your carpet cleaning machine vacuum system. The manufacturer of your primary air pump will provide you with the performance curve so you can accurately compute the airflow for a certain lift. The higher the CFM, the drier your carpet will be.